InMon Traffic Sentinel Installation and Getting Started Guide 2009-01

 20

addresses that the auto-discover process should scan in its search for ProCurve

switches. Individual switches can be added by clicking on the Edit Agents link.

For further information on configuring Traffic Sentinel, consult the online help and the

Configuring Traffic Sentinel tutorial at http://www.InMon.com/support/

10. Rebooting the Services zl Module

Rebooting should not normally be required and can potentially result in data loss. If for

some reason the Services zl Module becomes unresponsive, the following commands

can be used to reboot:

ProCurve# service b 1

ProCurve(services-module-B:PR)# boot <CR>

System will be rebooted, do you want to continue [y/n]? y

ProCurve# service b name services-module

ProCurve(services-module-B:PR)# boot <CR>

System will be rebooted, do you want to continue [y/n]? y

11. Technical Support

The Services zl Module is a hardware platform that allows application vendors to make

minor changes in their existing application software to run in a switch chassis. With a

wide variety of applications available from several vendors, HP is committed to

providing an "initial point of contact" for technical support. During this process, HP will

verify the installation, configuration, activation licensing, and warranty claims on the

Services zl Module. For problems concerning the application software, such as

configuration or licensing of the application from the vendor, HP may have to redirect

technical support to the application vendor to provide the best resources for solving a

support issue. Consequently, if you are confident that the technical support issue

resides within the application, it may be expeditious to contact the application vendor

directly.

For access to HP ProCurve support, go to:

http://www.procurve.com/customercare/support/

For troubleshooting tips, tutorials and Frequently Asked Questions, go to

http://www.InMon.com/support/