Installation and Getting Started Guide for 745wl and ACM xl 2006-06

ProCurve Secure Access 700wl Series Installation and Getting Started Guide 4-13
Basic Configuration
Figure 4-12. New RADIUS Authentication Service
Step 7.
Type the required information into the appropriate fields.
•Enter a
Name for this authentication service.
• Enter the
Server and Port information for your RADIUS server.
• Enter the
Secret that matches the RADIUS server secret, and enter it again in Confirm Secret.
• Leave the
Group Identity Field blank. This field is used to specify the name of a RADIUS
attribute that contains group information used to assign the authenticated user to an Identity
Profile.
If you elect to use this field, you must also create an Identity Profile to match the group
name that will be returned, and then add a row to the Rights Assignment Table to associate
an Access Policy with that Identity Profile.
• You can leave the default attribute name for the
Reauthentication Field. This field refers to the
name of a RADIUS attribute that specifies the duration (in seconds) after which the client is
forced to reauthenticate.
• Enter the authentication time-out period (in seconds) in
Timeout, or leave the default.
Step 8. Click Save. The Authentication Services page will reappear.
Step 9. Click the Authentication Policies link in the left panel. The Authentication Policies page will
appear.