Installation and Getting Started Guide for 745wl and ACM xl 2006-06

4-14 ProCurve Secure Access 700wl Series Installation and Getting Started Guide
Basic Configuration
Step 10.
Click System Authentication Policy in the Authentication Policies table to display the Edit
Authentication Policy page (Figure 4-13).
The newly added authentication service appears at the bottom of the list of available
Authentication Services for the System Authentication Policy.
Figure 4-13. Edit Authentication Policy Page
Step 11.
Use the row up/down buttons to move the newly added RADIUS service ahead of the Built-in
service, and put a check next to this service. (Leave the Built-in service checked as well.)
Step 12. Click Save.
The new RADIUS authentication service will now be the first service used to authenticate users
who are being authenticated by the System Authentication Policy. The System Authentication
Policy is used by the default Connection Profile “Any.”
Note: After you complete this step you will still be able to log in using the “demo” user name, because
the built-in database will still be searched if the user was not authenticated by the RADIUS server.