Installation and Getting Started Guide, ONE Advanced Services zl Module 2010-03

2-1
Getting Started
2
Getting Started
When the Advanced Services zl Module is shipped, it includes the hardware
along with the HP ProCurve Service Operating System (OS). The primary and
backup Service OS reside on the Compact Flash (CF).
The module does not ship with any ONE Integrated Applications (ONE-app)
installed. When the module is installed in a switch for the first time, the system
boots directly into the Service OS. From here, ONE Integrated Applications
can be downloaded, installed, and activated (if needed) on the module. The
ONE Integrated Applications include both the application and the Operating
System that the application requires, and are installed on the Hard Disk (HD).
Once the system can boot directly into the ONE-app (by using the boot ONE-
app CLI command), it will boot the ONE Integrated Application whenever the
module is brought up. Once the module has booted into the ONE Integrated
Application, it is completely controlled through the ONE Integrated Applica-
tion. The Service OS no longer controls it.