Installation and Getting Started Guide, ONE Advanced Services zl Module 2010-03

1-1
Hardware Installation
Module Overview
1
Hardware Installation
Module Overview
The HP ProCurve ONE Advanced Services zl Module is a x86 platform
designed to integrate Open Network Ecosystem (ONE) applications within
the HP ProCurve switch architecture. These applications are called ONE
Integrated Applications, and can offer more value than applications running
on stand-alone appliances. The module provides facilities to download, install,
and activate ONE Integrated Applications.
The module is managed through an easy to use Command Line Interface (CLI).
It can be installed in any HP ProCurve zl switch (either the 5400zl or 8200zl
switches). Depending on the switch chassis used, a maximum of four modules
can be installed in the same chassis. See “Environmental Specifications” on
page 1-5 for details.
The module requires a specific minimum software to be installed in the switch.
For information on which software version is required, see Appendix D in the
Web version of this document at www.hp.com/go/procurve/manuals, or see the
Read Me First shipped with the module.
The following figure shows the front panel of the Advanced Services zl
Module.
Figure 1-1. Front panel of the Advanced Services zl Module
Module
Shutdown button
Module
Locator LED
HDD and Network
activity LEDs
USB port
Module
Status LED
Management
port