Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 4-55
Configuring Rights
To configure the HTTP Proxy feature for anAccess Policy, select the HTTP Proxy tab, as shown in
Figure 4-27, and select or enter the data into the fields as described in Table 4-22.
Figure 4-27. Creating an Access Policy, the HTTP Proxy Tab
The fields under the HTTP Proxy tab are as follows:
Table 4-22. HTTP Proxy Tab Field Definitions
Field/Column Description
Automatic HTTP
Proxy
Enables or disables automatic HTTP proxy filtering for this Access Policy.
• Select the appropriate setting (Enabled or Disabled) from the drop-down list. The default is
Disabled.
Proxy Server Type the IP address or host name of the Proxy Server to which HTTP traffic should be
redirected. If a host name is entered, the Access Controller will perform a DNS lookup and
keep a list of all returned IP addresses with that host name.
Proxy Server Port Type the TCP port number used for the proxy server.
Monitored Ports A list of ports or port ranges that should be monitored for HTTP traffic.
• To enter a colon-separated list of ports or port ranges, type the list into the field provided.
You can also enter the list using commas as separators.