Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 4-57
Configuring Rights
• To create a new filter, click New Filter. The New Filters page appears. See “Creating or Editing an
HTTP Proxy Filter” on page 4-80 for more information.
The Bandwidth Tab
700wl Series system provides the ability to limit the bandwidth available to each client to prevent
network performance degradation. Using Access Policies, bandwidth can be limited on a client by client
basis. Separate limits can be set for upstream and downstream bandwidth.
On the
Bandwidth tab, as shown in Figure 4-28, select or enter data into the fields as described in
Table 4-23 below.
Figure 4-28. Creating an Access Policy, the Bandwidth Tab
The fields under the Bandwidth tab are as follows:
Bandwidth Rate Limiting in the 700wl Series system
700wl Series system provides bandwidth rate limiting (or “policing”) on a per-client basis. Each client
may use bandwidth as necessary up to the upstream or downstream limit set by the Access Policy
Table 4-23. Bandwidth Tab Field Definitions
Column Description
Upstream bandwidth limit Bandwidth limit for traffic from a client:
• Select a bandwidth setting from the drop-down list. The default is Unlimited.
Downstream bandwidth
limits
Bandwidth limit for traffic to a client:
• Select a bandwidth setting from the drop-down list. The default is Unlimited.