Management and Configuration Guide (Includes ACM xl) 2005-12

4-66 ProCurve Secure Access 700wl Series Management and Configuration Guide
Configuring Rights
• To replace an 802.1p priority setting, type the new priority setting in the Priority text box.
• To remove both the VLAN ID and 802.1p priority settings, check the
Remove check box.
• To assign a VLAN ID and priority based on other packet classification specified in the
Criterion fields, type the VLAN ID and 802.1p priority setting in the appropriate text boxes.
Step 4. Click Save to save this QoS Marking. If you have edited an existing QoS Marking, this replaces
the original QoS Marking with the modified QoS Marking definition.
To add the modified QoS Marking as a new QoS Marking, leaving the original QoS Marking
unchanged, click
Save As Copy. The Save As Copy button is available only on the Edit QoS
Marking page.
After a
Save As Copy the same page remains displayed so you can make additional changes.
Click
Cancel to return to the previous page without saving your changes.
Allowed Traffic Filters
Allowed Traffic filters are traffic filters that identify packets that are permitted to be forwarded by an
Access Controller. The 700wl Series system provides a number of predefined Allowed Traffic filters that
you can select to include in an Access Policy. Table 4-18 on page 4-48 lists the predefined Allowed
Traffic filters provided by the 700wl Series system.
If the predefined filters are not sufficient for your needs, you can define additional filters, or modify the
existing filters.
» To view the list of Allowed Traffic Filters currently defined in the 700wl Series system, click the Allowed
Traffic Filters
link on the main Access Policies page. The Allowed Traffic Filters page appears, as shown
in Figure 4-32.