Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 5-19
Configuring Authentication
To delete a Client, click the trash can icon at the end of the row.
Figure 5-7. RADIUS Clients
Step 8. To add an access point, click New Client. The New Client page appears (Figure 5-8). The Edit
Clients page is almost identical to the New Clients page, except the settings displayed are for
the RADIUS Client you have selected.
Figure 5-8. Adding a RADIUS Client
Step 9. The information required to add a RADIUS client is defined in Table 5-8.
Table 5-8. RADIUS Client Information
Field/Option Description
Name A name for the RADIUS client. Maximum of 32 alphanumeric characters.
Description A description of this RADIUS client.
IP Address The IP address or an IP address range (e.g. 192.168.128.0/24) of the RADIUS
client. If specifying a single IP address, it must be a static IP address.
Shared Secret The shared secret that allows access to the RADIUS server. This must match
exactly the secret configured on the access point.
The shared secret for the built-in RADIUS server is the same as the shared secret
for the Access Control Server.
Confirm Shared Secret The shared secret, entered a second time to confirm.