Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 5-21
Configuring Authentication
To edit a Client, click the Client name or the pencil icon at the end of the row. This takes you to
the Edit Client page.
To delete a Client, click the trash can icon at the end of the row.
Figure 5-10. RADIUS Clients
Step 8. To add an access point, click New Client. The New Client page appears (Figure 5-11). The Edit
Clients page is almost identical to the New Clients page, except the settings displayed are for
the RADIUS Client you have selected.
Figure 5-11. Adding a RADIUS Client
Step 9. The information required to add a RADIUS client is defined in Table 5-10.
Table 5-10. RADIUS Client Information
Field/Option Description
Name A name for the RADIUS client. Maximum of 32 alphanumeric characters.
Description A description of this RADIUS client.
IP Address The IP address or an IP address range (e.g. 192.168.128.0/24) of the RADIUS
client. If specifying a single IP address, it must be a static IP address.