Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 5-23
Configuring Authentication
Figure 5-13. Adding a Home Server
Step 14.The information required to add a Home Server is defined in Table 5-11.
Step 15.Click Save to save your changes.
Step 16.Once you are finished adding all the Home Servers, click Cancel from the Home Servers page
to return to the 802.1X/WPA page.
Step 17.You must specify at least one authentication realm. The proxy server uses realms to determine
where to forward RADIUS requests messages. Click
Realms to add a realm or view the current
realms (Figure 5-14).
To edit a Realm, click the Realm name or the pencil icon at the end of the row. This takes you to
the Edit Realm page.
To delete a Realm, click the trash can icon at the end of the row.
Table 5-11. Home Server Information
Field/Option Description
Name A name for the remote RADIUS server. Maximum of 32 alphanumeric characters.
Description A description of this remote RADIUS server.
IP Address The IP address of the remote RADIUS server.
Authentication Port The authentication port on the remote RADIUS server. The default is port 1812.
Accounting Port The accounting port on the remote RADIUS server. The default port is 1813.
Group Identity Field The RADIUS attribute used for group membership information that will be used to
match with an Identity Profile.
Shared Secret The shared secret on the remote RADIUS server.
Confirm Shared Secret The shared secret, entered a second time to confirm.