Management and Configuration Guide (Includes ACM xl) 2005-12

5-28 ProCurve Secure Access 700wl Series Management and Configuration Guide
Configuring Authentication
Step 1.
Click the Rights button in the Navigation bar, then go to the Authentication Policies tab.
Step 2. Click the Authentication Services link in the left panel to go to the Authentication Services page.
Step 3. On the Authentication Services page, click New Service button.
Step 4. Click the RADIUS link in the left-hand panel of the page.
The New Authentication Service - RADIUS page appears (see Figure 5-19).
The Edit Authentication Service - RADIUS page is almost identical to the New Authentication
Service - RADIUS page, except that the page and settings are displayed for the Authentication
Service you have selected. Also, a
Save As Copy button is provided.
Figure 5-19. Creating a New Authentication Service - RADIUS
Along with the authentication results, you can obtain the user’s group affiliation from the
authentication process. The returned group information will be used to match the user to an Identity
Profile in the Rights Assignment table. This assumes you have created Identity Profiles that match the
groups that may be returned from the authentication process.
The information required to configure the RADIUS service for authentication is defined in Table 5-15 as
follows:
Table 5-15. RADIUS Authentication Service Configuration
Field/Option Description
Name Your name for this authentication method. You can use any alphanumeric
string as the name.
Server The Fully Qualified Domain Name (FQDN) or IP address of the RADIUS
server.
Port UDP Port for RADIUS (Default is 1812).
Secret The shared secret for this RADIUS server.
Confirm Secret The shared secret, entered a second time to confirm.