Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 5-51
Configuring Authentication
Figure 5-31. Simulate User Rights Page
To simulate rights for a specific user, type information into the fields on this page as defined in
Table 5-19.
Table 5-19. User Rights Simulator Fields
Field Description
Access Controller and
Port
The Access Controller, slot and port to be used to simulate the user’s physical connection
location. This is one of the elements used to match the user to a Connection Profile.
VLAN Identifier The 802.1q VLAN tag normally included in packets from this user, if any. This is also one
of the elements that may be used to match the user to a Connection Profile. If traffic from
the user is untagged, leave this blank.
Time The date and time of day to be use to simulate the time of the user’s connection. This is
also used in matching the user to a Connection Profile.
Select Now if the current date and time should be used.
Simulate a user and password
Authentication Service The Authentication Service to be used to authenticate this username. The results of the
authentication is used to match the user to an Identity Profile.
Username The username (logon ID) of the user whose rights are to be simulated.
Note: Guest users do not have logon IDs within the 700wl Series system, so in order to
simulate Guest access rights you must use the logon ID of a “registered guest.” You can
create a registered guest by adding a user to the built-in database and assigning it to the
“Guest” identity profile.
Password The password for this user.
Simulate using a MAC address
MAC Address Check this box if the “username” is really a MAC address.