Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 5-55
Configuring Authentication
Step 2.
Click the Trace Transaction link in the left-hand column. The Transaction Tracer page appears,
as shown in Figure 5-33.
Figure 5-33. The Trace Transaction page
Step 3. To trace the authentication transaction for a specific user, enter information into the fields on
this page as shown in Table 5-20:
Step 4. Click Trace Transaction to submit the username for authentication. Figure 5-34 shows the
authentication results for a user who was successfully authenticated against an LDAP
database.
Note:
When tracing a transaction to a RADIUS server, the Transaction Trace function uses PAP.
Therefore in order to use the Transaction Trace function with RADIUS, you must enable PAP on
your RADIUS server, even if you normally use MSCAHP.
Table 5-20. Trace Authentication Transaction Fields
Field Description
Username The username (logon ID) of the user whose rights are to be simulated.
Password The password for this user.
Authentication Service The Authentication Service to be used to authenticate this username.