Management and Configuration Guide (Includes ACM xl) 2005-12

6-4 ProCurve Secure Access 700wl Series Management and Configuration Guide
Configuring the Network
Editing the Access Control Server Configuration
The Access Control Server is typically configured with its network configuration parameters and shared
secret when it is initially installed on the network, per the instructions in the Quick Start Guide or
Installation and Getting Started Guide shipped with the hardware.
However, there are several situations in which you may need to modify the Access Control Server
configuration:
• To function in a redundant configuration as either a Primary or Secondary Access Control Server
• To enable SSH access to the unit for remote CLI or Technical Support access
• To configure or change the shared secret used to establish a trust relationship between the Access
Control Server and the associated Access Controllers, or with a peer Access Control Server in a
redundant configuration.
» To edit a Access Control Server configuration, click on the name of the Access Control Server in the
System Components List, or click the pencil icon ( ) to the far right of the Access Control Server.
The Edit Access Control Server page appears as shown in Figure 6-3.
Figure 6-3. Edit Access Control Server page