Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 6-19
Configuring the Network
Figure 6-9. Creating a new Subnet Group
To create a Subnet Group, specify the following information:
Field Description
Name Name of the Subnet Group.
DHCP Server IP IP address of an external DHCP server on a remote subnet used to provide real IP
addresses for clients. Setting this causes the Access Controller to perform DHCP
relay for this subnet.
This is required only if the DHCP server is not in this Subnet Group,and is not
reachable through a DHCP relay agent (helper).
Leave blank if the DHCP server or a DHCP relay agent is on the local subnet .
Domain Name The name of the domain in which this system resides, for example hp.com. This will
be used as the default domain, and appended to any host names that are not fully-
qualified.
Primary DNS The IP address of the primary DNS server.
Secondary DNS The IP address of the secondary DNS server.
Primary WINS The IP address of the primary WINS server.