Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide 7-7
Setting up Wireless Data Privacy
d.
Type your two-character ISO country code (US for the United States, UK for the united
Kingdom, and so on). You can access the list of country codes at the following URL:
http://ftp.ics.uci.edu/pub/websoft/wwwstat/country-codes.txt
e. Type your organization name. This is the name that will be published on the certificate.
Step 4. Click Generate CSR to generate the certificate request.
This produces a PKCS#10 certificate request that you can paste into a CA’s certificate request
form. Figure 7-4 is an example of a generated request.
Figure 7-4. The Generated CSR request
Step 5. Connect to your Certificate Authority web site, and start the certificate request process.
Because you have generated a PKCS#10 certificate request, you should go to the Server Certificate
Enrollment page, where you can paste your certificate request. In a Netscape Certificate
Management System, for example, this is the SSL Server page.
Caution:
You must generate a PKCS#10 certificate request through the Integrated Access
Manager or Access Control Server Administrative Interface, and connect to the CA web site from
the same system on which you are running the Administrative Interface. You cannot request a
certificate through the CA’s manual request interface. Certificates you receive through that
process will not work with the 700wl Series system.
Step 6.
Copy and paste the generated PKCS#10 certificate request, including the lines
----BEGIN CERTIFICATE REQUEST---- and ----END CERTIFICATE REQUEST----
into the appropriate field in the request form.
Once you have copied and pasted the CSR, click
Done to return to the IPSec Certificate
Configuration page.
Figure 7-5 shows the enrollment form of a Netscape Certificate Management System with the CSR
pasted into the PKCS#10 text area.