Management and Configuration Guide (Includes ACM xl) 2005-12

7-8 ProCurve Secure Access 700wl Series Management and Configuration Guide
Setting up Wireless Data Privacy
Figure 7-5. A Certificate Management System Enrollment form
Step 7. You may be asked to fill in additional information, such as your contact information. In the
example shown in Figure 7-5, the contact information does not need to match the name and
email you provided in the certificate request.
Step 8. When you have filled in any required information, submit the request.
You will probably receive an acknowledgment of your request, possibly with a request ID or other
confirmation information.
Step 9. After the CA approves your request, you should then be able to retrieve two certificates -- your
local signed certificate and the CA’s root certificate.
Step 10.On your CA’s web site, go to the location where you can retrieve your certificates.
You may need to enter the request ID or confirmation information you received when you
submitted your certificate request.
When your certificate is displayed, find the portions that you can copy and paste into the HP
system.
The example in Figure 7-6 shows the portion of the certificate where the information you need to
copy is located. Note that the certificates are in the same format as the certificate request you
generated. In this example, the local certificate information is in the first block, and the CA
certificate is in the second block.