Management and Configuration Guide (Includes ACM xl) 2005-12

8-16 ProCurve Secure Access 700wl Series Management and Configuration Guide
System Maintenance
Step 1.
From within the Maintenance module, click the Shutdown/Restart tab.
The Shutdown/Restart page appears, as shown in Figure 8-10.
Step 2. Select the component you want to shut down or restart from the System Components List at
the left of the page.
The Shutdown/Restart page displays the system uptime for the component you have selected, as
well as buttons to initiate a shutdown, restart, or reset to defaults action.
Figure 8-10. Shutdown/Restart Tab
Restarting a System Component
Restarting a component will briefly shutdown the unit, then restart it using the Installed Version
software image. This action does not power off the unit.
To reboot a selected system component:
Step 1. Select the unit you want to reboot from the System Components List.
Step 2. Click Restart Now.
A confirmation page appears, as shown in Figure 8-11.