Management and Configuration Guide (Includes ACM xl) 2005-12

A-1
A
COMMAND LINE INTERFACE
This appendix documents the commands that are available on the serial console as part of the
Command Line Interface (CLI). The CLI enables initial configuration and subsequent troubleshooting of
the 700wl Series system.
The Command Line Interface commands are listed in the following categories:
Accessing the Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Getting CLI Command Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Administrator Access Control Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
System Status and Information Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
Network Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8
Port Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11
Access Controller Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14
Access Control Server Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15
Remote Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-18
Encryption Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-20
Active Client Management Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-22
System Backup, Upgrade and Shutdown Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-24
Diagnostic and Log Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-29
Time Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-32
SNMP Configuration and Reporting Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-34
Note:
You can also perform these functions through the Administrative Interface on the Access Control
Server.
For an alphabetical listing of commands see the “Index of Commands” at the back of this manual.
Note:
Only a subset of these commands are supported on an Access Controller. Access Controller
configuration changes should be performed through the Administrative Interface from the managing
Access Control Server.