Management and Configuration Guide (Includes ACM xl) 2005-12

ProCurve Secure Access 700wl Series Management and Configuration Guide A-19

Remote Info for 192.168.10.68:

System Boot Time: Oct 13 15:38:09 2003

System Current Time: Oct 13 18:10:26 2003

System Backup Time: Dec 31 16:00:00 1969

Current Version: 3.5.238

Current Install Time: Oct 13 15:36:17 2003

Alternate Version: 3.5.234

Alternate Install Time: Oct 10 10:47:02 2003

Min Downgrade Ver: 3.5.141

The following is an example of a specific item request:

remote sysinfo 192.168.10.68 cur_install

Remote Info for 192.168.10.68:

Current Install Time: Oct 13 15:36:17 2003

remote reboot <ip-address>

Reboot the system at <ip-address>

remote rebootalt <ip>

Reboot the system at <ip-address> to alternate software version.

remote shutdown <ip-address>

Shutdown the system at <ip-address>

remote factoryreset <ip-address>

Factory reset the system at <ip-address>

remote upgrade <ip-address> <url> <key>

Upgrade the system at the specified IP address.

<url> The URL encoded location of the software release to install. The format of the URL is

<protocol>://<host>/<update file> or

<protocol> can be ftp, http, or tftp.

<username>[:<password>] specifies a username and optional password with

access to the remote site, if required.

<update file> is the filename (including the path) of the software image.

For TFTP or anonymous FTP, the path is relative to the FTP or TFTP root. If a

username and password is required for FTP, then the full path to the update file must

be specified. For HTTP, the path is always relative to the web server’s site root

directory.

The host must be an FTP, HTTP or TFTP server.

<key> The software release install key obtained from ProCurve.