Manualshelf

Management and Configuration Guide (Includes ACM xl) 2005-12

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
51525354555657585960
3-8 ProCurve Secure Access 700wl Series Management and Configuration Guide
System Status
By default Status page data is refreshed only when you click Apply Filters. You can set the page to
automatically refresh the data at specified intervals.
» To set the page to refresh the data at specified intervals, select the desired refresh interval from the drop
down list of possible refresh rates (or select Auto Refresh Off to disable this) and click
Apply Filters.
Table 3-5 shows the Client status filtering options you can use to filter the Client status display:
Viewing Client Details
To view details for a specific client, click the username or MAC address in the Client column of the
Client Status table. A Client Detail page appears for the selected client.
The following information is displayed on this page:
Table 3-5. Client Status Filtering Parameters
Filter by: Details
Access Controllers Lets you display only sessions for a selected Access Controller or for all Access
Controllers. You select the Access Controller from the drop down list.
Default is All Access Controllers.
Client Type Lets you filter for:
• All Clients.
• Authenticated Clients.
• Unauthenticated Clients.
Default is All Clients.
Rows per Page Lets you specify the number of rows to be displayed on a page. You can choose 25, 50, 75,
or 100 rows per page. Additional results appear on successive pages.
The default is 25 rows per page.
Auto Refresh Lets you specify how often the Clients status display should be refreshed:
• Auto Refresh Off.
• Refresh every 15 seconds.
• Refresh every 30 seconds.
• Refresh every 45 seconds.
• Refresh every 60 seconds.
Default is Auto Refresh Off.
Table 3-6. Active Client detail information
Information Description
User The descriptive name of the user, if known.
Username The username (logon name) of the user or the MAC address, if the user is identified by MAC
address.
MAC Address The MAC address (hardware ID) of the client.
Machine Name The name of the machine, if known.