Management and Configuration Guide (Includes ACM xl) 2005-12

3-10 ProCurve Secure Access 700wl Series Management and Configuration Guide
System Status
Viewing Session Status
Viewing session status provides information on a client’s open sessions and network traffic.
» To view active sessions, click the Session Status tab.
The View Active Sessions page appears.
» To filter the session data, select the desired filters and click Apply Filters.
» To set an auto refresh interval, select the desired interval from the drop down list and click Apply Filters.
» To set the number of rows to display per page, select the desired number from the drop down list and
click
Apply Filters.
» To go to different pages of the session status table, use the page navigation controls at the bottom of the
page on the left.
The following information is displayed on the Session Status page:
Filtering Session Status Information
To make it easier to find the information you need from a Session Status page, you can filter the display
to show only a subset of the entries.
Table 3-7. View Active Sessions Information
Column Description
Protocol The protocol used by the session. The following protocols are translated from their numeric
strings: CMP, ICMP, TCP, UDP, ESP, AH, IP, and PPTP. All other protocols are displayed as
the protocol number prefixed with a pound sign (#).
Idle The time since the last packet was received, in hours (h) and minutes (m) and seconds (s).
MAC address The MAC address of the client associated with this session.
Client Source
Actual Source
Client Source: The IP address and port of the client system, as placed in the packet header
by the client.
Actual Source: For a client in NAT mode, the IP address and port of the Access Controller,
as re-written after translation.
If the address is shown in dark blue bold, the session has been tunneled from another
Access Controller due to roaming.
Client Destination
Actual Destination
Client Destination: The destination IP address as placed in the packet by the client.
Actual Destination: The destination IP address and port as re-written by the Access
Controller.
• If the address is in dark red italics, this session was redirected based on the rights in effect
for this location.
Slot/Port The Access Controller slot and port number used by the session (if any). .
Bytes Transmitted The total number of bytes transmitted.
Bytes Received The total number of bytes received.