Manualshelf

Management and Configuration Guide (Includes ACM xl) 2005-12

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
51525354555657585960
ProCurve Secure Access 700wl Series Management and Configuration Guide 3-11
System Status
» To filter a display, select the filtering parameters from the filter drop down lists in the left panel of the
status page and click
Apply Filters. This refreshes the display with the status results based on the
filtering parameters you have set.
By default Status page data is refreshed only when you click
Apply Filters. You can set the page to
automatically refresh the data at specified intervals.
» To set the page to refresh the data at specified intervals, select the desired refresh interval from the drop
down list of possible refresh rates (or select Auto Refresh off to disable this feature) and click
Apply
Filters
.
Table 3-8 shows the Session status filtering options you can use to filter the Session status display:
Viewing License Information
The License Information page shows the license, copyright, and trademark information for all third-
party software used by the 700wl Series system.
» To view version and license information, click the License Information tab on the Status pages.
Table 3-8. Session Status Filtering Parameters
Filter by: Details
MAC Address Lets you display sessions for a selected MAC address or for all MAC addresses. Select a
MAC address from the drop-down list.
Default is All MAC Addresses.
Protocol Lets you display only sessions using a selected protocol. You select the protocol from the
drop-down list.
Default is All Protocols.
Access Controllers Lets you display only sessions for a selected Access Controller. You select the Access
Controller from the drop-down list.
Default is the first Access Controller in the list.
Port Lets you display only sessions for a selected port or for all ports of the selected Access
Controller. You select the port from the drop-down list.
Default is All Ports.
Rows per Page Lets you specify the number of rows to be displayed on a page. You can choose 25, 50, 75,
or 100 rows per page. Additional results appear on successive pages.
The default is 25 rows per page.
Auto Refresh Lets you specify how often the Clients status display should be refreshed:
• Auto Refresh Off.
• Refresh every 15 seconds.
• Refresh every 30 seconds.
• Refresh every 45 seconds.
• Refresh every 60 seconds.
Default is Auto Refresh Off