Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

6
Overview
Additional information on the initial setup of the Modules in the
5300xl switch can be found in the ProCurve Series 5300xl Switches
Installation and Getting Started Guide.
For initial setup instructions with examples, see the ProCurve Wire-
less Edge Services xl Modules Getting Started Guide provided with
the Module.
For detailed information and instructions on how to configure and
manage a Module and wireless services in your network, refer to the
ProCurve Wireless Edge Services xl Modules Management and
Configuration Guide.
The latest versions of these documents are available on the ProCurve Net-
working Web site at www.procurve.com (click on Technical support, then Prod-
uct manuals (all), then ProCurve Switch 5300xl series).
Overview
Installing a ProCurve Wireless Edge Services xl Module or a ProCurve Redun-
dant Wireless Services xl Module in a Series 5300xl switch creates a wireless
services-enabled switch that centrally configures and manages ProCurve
Radio Ports, distributed throughout a network, to provide 802.11 wireless
services. Licenses installed on the Wireless Edge Services xl Module, the
primary Module, determine how many radio ports can be controlled. The
Redundant Wireless Services xl Module supplies failover or availability
options within a wireless LAN.
A Module has no visible external ports. It communicates with the wired
(uplink) and wireless (downlink) sides of the network through the VLAN
connectivity of its internal ports. An uplink VLAN, containing the Module’s
uplink port, communicates with the wired side of the network; downlink radio
port VLANs, containing the Module’s downlink port, communicate with the
wireless side of the network. The internal Module ports are tagged members
of their respective VLANs.
Note It is recommended that any infrastructure switch connecting a radio port and
the wireless services-enabled 5300xl switch also be a member of a manage-
ment VLAN that includes that 5300xl switch. This provides management of
these switches through the wireless services-enabled 5300xl.