Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

8
Overview
Figure 1. VLAN Support for the Wireless Edge Services Module and Radio Ports
Note Routing may not be used in the communications path between the Wireless
Services-Enabled Switch 5300xl and a radio port when a radio port is adopted
at Layer 2. See “Radio Ports as Layer 3 Devices” on page 9 for more informa-
tion.
Wireless Services-Enabled Switch 5300xl
Wireless Edge Services
xl Module
Downlink Port
Uplink Port
Uplink Network Ports
Downlink Radio Ports (Power over Ethernet-enabled)
Radio Port VLAN/Auto-VLAN (Default: VLAN 2100)
-Downlink Port (<slot-id>DP) is a tagged member.
- Port directly connected to a Radio Port is an untagged member.
Uplink VLANs
- Uplink Port (<slot-id>UP) is a tagged member.
- Uplink Network Port is whatever the network requires.
Station
Power
Fault
Gig-T
Ports
GBIC
Mini
Ports
Use onlyone(TorM) for Gigabit port
Status
LED
View
Test Pwr
Spd
FDx
Act
Fan
EPS
RPS
off= 10 Mbps,Spd mode: flash = 100Mbps, on = 1000 Mbps
Reset Clear
hp procurve
switch2650-PWR
J8165A
10/100Base-TX Ports (1-48)
31
25 26
32
27
33
28
34
29
35
31 36
25 30
43 48
37 42
43 44 45 46 47 48
42414039383730
36
7
1 2
8
3
9
4
10
5
11
16
24
13 18
19 20 21 22 23 24
1817161514136
12
M
50
M
49
<slot-id>UP
<slot-id>DP
...
Infrastructure switch (ports must be
members of Radio Port VLAN)
Ports must be Radio Port VLAN
members (tagged or untagged)
and a a member of a VLAN for
managing the switch.
Port Connected to Radio Port
must be untagged
Radio Port VLAN member
Power over Ethernet-enabled switch
connected to Radio Port
Legend
- Static VLANs
Radio Port
Radio Port
Radio Port
Layer 2 Radio Port Adoption
Subnet 192.168.100.0/24