Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

13
5300xl Switch Support for the Wireless Edge Services xl Module
Table 1. Automatic VLAN Provisioning with LLDP
Event
State
Auto-Provision
No Auto-VLAN
(initial default state)
Auto-Provision
Auto-VLAN
No Auto-Provision
Auto-VLAN
No Auto-Provision
No Auto-VLAN
Wireless Edge
Services XL Module
Detected
• Create Auto-VLAN
from vlan-base
• Add <slot-id>DP
tagged to Auto-
VLAN
• Remove <slot-
id>DP tagged from
VLAN 1
• Add <slot-id>UP
tagged to VLAN 1
New State:
Auto-Provision
Auto-VLAN
• Add <slot-id>DP
tagged to Auto-
VLAN
• Remove <slot-
id>DP tagged from
VLAN 1
• Add <slot-id>UP
tagged to VLAN 1
• Add <slot-id>DP
tagged to Auto-
VLAN
• Remove <slot-
id>DP tagged from
VLAN 1
• Add <slot-id>UP
tagged to VLAN 1
• Add <slot-id>DP
tagged to VLAN 1
only if it belongs to
no other VLAN. If
the downlink port is
a static member of
a VLAN, it is
unchanged.
• Add <slot-id>UP
tagged to VLAN 1
Wireless Edge
Services XL Module
Removed
• No action taken • No action taken • No action taken • No action taken
Radio Port Detected
(LLDP enabled on
switch and port)
• Create Auto-VLAN
from vlan-base
• Adds DRP
1
to Auto-
VLAN (temporary
VLAN override)
New State:
Auto-Provision
Auto-VLAN
• Adds DRP
1
to
Auto-VLAN
(temporary
override)
• No action taken • No action taken
Radio Port Removed • No action taken
(Only possible if no
Modules are
installed and LLDP
is disabled on the
switch or the port)
• Removes DRP
1
from Auto-VLAN
• No action taken • No action taken
1
DRP is a Downlink Radio Port (Part 1 of 3)