Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

15
5300xl Switch Support for the Wireless Edge Services xl Module
An Auto-VLAN is created when: a Wireless Edge Services xl Module or a
Redundant Wireless Services xl Module is first inserted into a 5300xl or a radio
port is directly connected to a PoE-enabled 5300xl switch port is detected.
User Enables Auto-
Provision
• No action taken • No action taken • Confirm that all
<slot-id>DPs are
tagged members of
Auto-VLAN
New State:
Auto-Provision
Auto-VLAN
• Enable Auto-
Provision
• If Module installed:
– Create Auto-
VLAN from vlan-
base
– Add <slot-id>DP
tagged to Auto-
VLAN
– Remove <slot-
id>DP tagged
from VLAN 1
– Add <slot-id>UP
tagged to
VLAN 1
New State (No Module
or DRP
1
):
Auto-Provision
No Auto-VLAN
New State (Module or
DRP
1
):
Auto-Provision
Auto-VLAN
User Disables Auto-
Provision
• Disable Auto-
Provision
New State:
No Auto-Provision
No Auto-VLAN
• Disable Auto-
Provision
• If Auto-VLAN exists
and is empty, delete
Auto-VLAN
New State (Auto-
VLAN not empty):
No Auto-Provision
Auto-VLAN
New State (Auto-
VLAN exists and is
empty):
No Auto-Provision
No Auto-VLAN
• No action taken • No action taken
Event
State
Auto-Provision
No Auto-VLAN
(initial default state)
Auto-Provision
Auto-VLAN
No Auto-Provision
Auto-VLAN
No Auto-Provision
No Auto-VLAN
1
DRP is a Downlink Radio Port (Part 3 of 3)