Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

Accessing the Module’s CLI

In earlier software versions, access to the Module’s CLI was limited to only

switch managers, with access to the global Config level in the 5300xl CLI.

WS.02.xx (or greater) allows access to the Module’s CLI based on the user’s

access level: operator or manager. The Module CLI can be accessed using the

following commands from the 5300xl CLI:

ProCurve> wireless-services a

ProCurve(wireless-services-A)> #

ProCurve# wireless-services a

ProCurve(wireless-services-A)#

Table 3 shows the commands available at the switch operator and manager

levels.

Table 3. Module CLI Commands by User Access Level

Operator

(ProCurve >)

Manager

(ProCurve #)

Description

– acknowledge Acknowledge alarms

– archive Manage archive files

cd cd Change current directory

– clear Reset functions

cls cls Clear the display screen

– configure Enter configuration mode

– copy Copy from one file to another

– debug Debugging functions

diff diff Display differences between two files

dir dir List files on a file system

– edit Edit a text file

– erase Delete specified file from the system

exit exit End current mode, return to previous mode