Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

26
Management Interfaces
The no lldp auto-provision radio-ports auto-vlan <vid> may be used to delete the
radio port Auto-VLAN. See Table 1, “Automatic VLAN Provisioning with
LLDP,” on page 13 for information on the changes that occur, depending on
the current state of the switch.
Managing Module Configuration Files
The configuration files for the Wireless Edge Services xl Module and the
Redundant Wireless Services xl Module are stored on the Module, not on the
5300xl switch, unlike other 5300xl Modules. An external FTP or TFTP server
must be used to back up and restore a Module’s complete configuration. The
switch does save a small subset of the Modules configuration that allows the
switch to locate the full configuration file on the external FTP or TFTP server
and to validate it using a checksum.For more information on configuring and
managing configuration files on an external FTP or TFTP server see the
ProCurve Wireless Edge Services xl Modules Management and Configura-
tion Guide.
The stored subset of a Module’s configuration file appears in a
show running-config or show config command as uneditable text.
Management Interfaces
To configure and manage the ProCurve Wireless Edge Services xl Module, you
can use one of the following management interfaces:
Web browser interface—Accessed through a Web browser, this intu-
itive interface provides comprehensive information to help you
manage and monitor your company’s wireless services. The menus
and online help guide you through configuration steps.
Command line interface (CLI)—Available through a serial, Telnet, or
Secure Shell (SSH) session to the 5300xl switch, the wireless services
context, accessed from the 5300xls CLI Config context, provides a
complete set of commands to configure, manage, and troubleshoot
your wireless services.
The CLI commands available in the wireless services context of the 5300xl
CLI are documented in an appendix of the ProCurve Wireless Edge
Services xl Modules Management and Configuration Guide. Refer to this
manual for more information.