Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

27
Management Interfaces
Because the Web browser interface simplifies both management and config-
uration tasks, this interface is recommended. See the ProCurve Wireless Edge
Services xl Modules Management and Configuration Guide for information
on using the Web browser interface to configure and manage a Module.
To run the Web browser interface for the ProCurve Wireless Edge Services xl
Module, your workstation must be running Java Virtual Machine (JVM), which
enables the Web browser to run Java applets. If your workstation is not
running the JVM and you attempt to open the Module’s Web browser interface,
the workstation will automatically try to access the Internet and download
the JVM.
In addition to ensuring that your workstation is running JVM, you must be able
to access the Wireless Edge Services xl Module’s IP address from the work-
station that is running the Web browser. Either determine the Dynamic IP
Address (DHCP) assigned to the Module or assign a static address and default
gateway before attempting access to this interface.
Alternately, you can access the 5300xl switch’s Web browser interface to
access the Module Web browser interface. Open a browser window, using the
switch’s IP address. Go to the Configuration tab, then select the link displayed
on the Module’s image.
Figure 3. Accessing the Module Web Browser Interface