Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

Management Interfaces

Module Configuration Commands Summary and Syntax

Configuration Context Command Syntax

Command Page

Configuration Context

[no] lldp auto-provision radio-ports 28

[no] lldp auto-provision radio-ports auto-vlan <vid> 29

lldp auto-provision radio-ports vlan-base <2-4094> 29

wireless-services <slot-id> 29

wireless-services <slot-id> reload 29

wireless-services <slot-id> shutdown 29

Wireless-Services Context

For a complete listing of the commands, please refer to the ProCurve

Wireless Edge Services xl Modules Management and Configuration

Guide.

Syntax: [no] lldp auto-provision radio-ports

Enables ports connecting to a radio port, discovered

using LLDP, to be automatically placed into the Auto-

VLAN. LLDP must be enabled on the switch and the

port.

When enabled (the default) the Auto-VLAN (default

2100) is created when a Module or radio port is

detected. The Module downlink port, <slot-id>DP, is

placed in the Auto-VLAN as a tagged member; the

Module’s uplink port, <slot-id>UP, is placed in the

DEFAULT_VLAN (VLAN 1) as a tagged member.

The no form can be used to disable this automatic port

placement.