Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

31
Displaying Wireless Edge Services xl Status from the 5300xl CLI
Configuration Context Command Syntax
Syntax: show lldp auto-provision radio-ports
Displays the configuration and status of the
following auto-provisioning elements. Items in [ ]
are default values:
LLDP Radio Port Enable [Yes]
LLDP Radio Port suggested auto-vlan [2100]
LLDP Radio Port auto-vlan
LLDP Radio Port assigned ports
LLDP Global Enable [Yes]
Syntax: show Modules
Displays all Modules installed in the 5300xl switch.
The Module slot, a Module description, and the
Module serial number are shown.
This command is also valid in the global context.
Syntax: show wireless-services <slot-id>
Displays the following for the wireless services Module in slot-id
(a - h).
Versions Module version information for
support staff.
Current status BIOS error
booted
booting
booting timed out
configuration fault
failed to boot
halted
initializing
not responding
performing self-test
rebooting
running
self-test failed
shutting down
shut down (safe for removal)
Uplink MAC Address MAC address for the Module’s uplink
port.