Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

33
Module Messages in the Event Log
Module Messages in the Event Log
Beginning with software version WS.02.xx, the Module sends messages to the
5300xl switch Event Log. Each log message contains the following elements:
<severity code> <date stamp> <time stamp> <number> wsm <slot-
id>: message
Messages reporting the module’s status, sent by the 5300xl switch, are
included here. These log messages contain the following elements:
<severity code> <date stamp> <time stamp> <number> HPESP: message
Wireless Edge Services Module Event Log messages from the module and the
switch are described below.
# Message Severity Description
0
Wireless Services XL Module <slot-id>: Self-
test failed (reason)
major The module self-test failed. The reason
appears in parentheses.
1
Wireless Services XL Module <slot-id>: base
configuration transfer failed
major A problem occurred when loading the
module configuration
2
Wireless Services XL Module <slot-id>:
incompatible BIOS version: (version)
major The module BIOS is not compatible
with the current switch software.
3
Wireless Services XL Module <slot-id>
diagnostics partition is ready
major The diagnostics partition has been
loaded and is ready for use.
4
(Message is not applicable to this module.)
5
(Message is not applicable to this module.)
6
(Message is not applicable to this module.)
7
(Message is not applicable to this module.)
8
(Message is not applicable to this module.)
9
Wireless Services XL Module <slot-id>:
application initialization failed
major The application did not initialize due to
a software incompatibility with the
switch or the application could not
create VLANs.
10
Wireless Services XL Module <slot-id>: Illegal
event <id> at state <id>
major This message is used for debugging
purposes.