Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

34
Module Messages in the Event Log
11
Wireless Services XL Module <slot-id>:
excessive reboots detected
major Communication has not been
established with the switch. The
module is not ready.
12
Wireless Services XL Module <slot-id>
removed before shutdown completed
major The module was removed before the
shutdown process was completed.
13
Wireless Services XL Module <slot-id> is safe
for removal
info The module may be safely removed
from the chassis.
14
Wireless Services XL Module <slot-id>:
incompatible application version: (version)
major The module software is not compatible
with the switch software.
15
(Message is not applicable to this module.)
16
Wireless Services XL Module <slot-id> is
shutting down
info The shutdown process has been
initiated.
17
Wireless Services XL Module <slot-id> is
rebooting
info The module is being rebooted.
18
Wireless Services XL Module <slot-id> is
booting
info The module is loading its operating
system.
19
Wireless Services XL Module <slot-id> is ready
info The module has loaded its operating
system and is ready.
20
Wireless Services XL Module <slot-id> HPLAP
send TLV error condition <id> on connection
ID <id>
info A transmit error occurred between the
application and the switch when
sending a type, length, and value
element.
21
(Message is not applicable to this module.)
22
Wireless Services XL Module error processing
license.
major A license could not be read or updated.
23
Slot <slot-id> License updated successfully
info A license update was successful.
24
Wireless Services XL Module error while
processing.
warning An unexpected event occurred when
accessing module's application data.
25
Wireless Services XL Module <slot-id> flash
write aborted; write already in progress
info A write to the module’s flash memory
failed because another write was
already in process.
1500
ESPd beginning main:xx.xx.xx.
info The module is starting operation. The
platform version, xx.xx.xx, is listed.
1501
Connection to switch status changed, status xx
major A protocol error has occurred. A status
code is provided for Support use.
1502
Received empty license record.
major A default license is not installed.
Contact ProCurve.
# Message Severity Description