Management and Configuration Guide Wireless Edge Services xl Module Supplement 2007-06

36
BIOS POST Event Log Messages
BIOS POST Event Log Messages
If a critical BIOS power on self test (POST) failure occurs when the Wireless
Edge Services xl Module or the Redundant Wireless Services xl Module is
inserted into a slot in a 5300xl chassis, the message below is posted to the
Event Log. The 5300xl switch resets the Module, up to two times (a total of
three attempts to pass the POST). If the Module fails three consecutive times,
the Module does not power on. The 5300xl switch can operate successfully if
the Module does not power on.
The POST error bitmap values are explained below.
Slot <slot-id> Wireless Services Module Bios POST tests failed,
Post bitmap = 0xXXXX
0x0001 IDE failure.
0x0002 System memory failure.
0x0004 Shadow memory failure.
0x0020 Protected memory failure.
0x0040 CMOS not ready error.
0x0100 Periodic timer failure.
0x0800 Device configuration error.
0x1000 Memory configuration error.
0x2000 Non-volatile RAM failure.
0x4000 External or CPU cache failure.
0x8000 Level2 cache failure.