PCM+ Agent with ONE zl Module Installation and Getting Started Guide 2009-11

1-15
Getting Started
Setup
2. Install the product license key by typing the following command:
For example, if the product license key is
SG000GG000-A-0123456-ABCDEFG-0123456-ABCDEFG, you would type:
hostswitch(services-module-C:HD)# licenses install activation
SG000GG000-A-0123456-ABCDEFG-0123456-ABCDEFG
You can now boot the ONE Services zl Module to the Product OS so that
you can begin configuring the PCM+ Agent Module.
Boot the ONE Services zl Module to the Product OS
To boot the ONE Services zl Module to the Product OS, complete the following
steps.
1. From the Services OS context, enter:
2. When asked if you would like to reboot the module, type y.
hostswitch(services-module-C:HD)# boot product
Changing boot from Service OS to Product OS.
System will be rebooted. Do you want to continue
[y/n]? y
Rebooting
Syntax: licenses install activation <license key>
Installs the product license key on the switch.
Replace <license key> with the product license key that was
generated when you registered PCM+ Agent Module on the My
ProCurve portal.
Syntax: boot product
Boots the Product OS—in this case PCM+ Agent Module.