PCM+ Agent with ONE zl Module Installation and Getting Started Guide 2009-11

1-25
Getting Started
Establishing PCM+ Server Communication
connection, all remote agents must use the same port, encryption type,
and server password. If you require changes to the default Server settings,
make them on the Server Setup tab in Agent Manager. Note the changes
you make so that you can make the same changes on the Agent’s Web
browser interface’s Agent Credentials and Agent Connection pages.
2. Verify that the check box Allow new agents to connect is checked, as shown
below.
3. Note the PCM+ Server’s IP address, for use in configuring the PCM+ Agent
Module.
4. Access the Agent’s Web browser interface by entering the following URL
in a browser:
https://
<Agent IP address > :8080
where <Agent IP> is the PCM+ Agent Module’s IP address; 8080 is the
default port. The default User Name is admin and the default password is
procurve.