PCM+ Agent with ONE zl Module Installation and Getting Started Guide 2009-11

1-33
Getting Started
Example PCM+ Agent Module Deployment
Connecting to the PCM+ Agent Module
The PCM+ 3.10 Server, outside the firewall, establishes communication with
the PCM+ Agent Module, behind the firewall, using 42.167.195.23
as the IP
address of the Agent. This IP address (42.167.195.23) appears in the Agent
Manager as the Agent’s IP address. The Agent Web browser interface shows
the Agent’s private network address. To simplify identifying an Agent, add text
describing its location and private IP address to the Agent Description.
Managing the Private Network
Enable the Agent Proxy using PCM+ 31 Agent Manager to gain management
access to devices on the private network using Telnet, SSH, or the Web
browser interface.
PConfiguring the Agent to Enable a Proxy
Follow these steps.
1. Select the Agent requiring a proxy and click the Proxy tab.
2. Check the Enable proxy check box.
3. To use the default proxy port (identified in the Server Setup tab), check
the Use default in PCM check box. If checked, the server will assign port
numbers automatically from the Proxy port range defined on the Server
Setup tab.
4. To set a specific proxy port to be used for the Agent, ensure the Use default
in PCM check box is not checked and type the port number in the Proxy
port field.
5. Click Apply to save your changes and leave the Agent Manager window
open
or
Click OK to save your changes and close the Agent Manager window.