PCM+ Agent with ONE zl Module Installation and Getting Started Guide 2009-11

1-34
Getting Started
Example PCM+ Agent Module Deployment
When configuring an Agent to use a proxy, you must configure your Web
browser to use a Proxy auto-configuration file to be able to open device Web
configuration pages. The file is located at:
http://<PCM+ 3.10 Server IP address>:8040/pac/pcm_autoproxy.pac
Replace <PCM+ 3.10 Server IP address> with the IP address of your PCM+ 3.10
Server. For example, if your Server is located at 42.167.133.110 you would place
the following URL
http://42.167.133.110:8040/pac/pcm_autoproxy.pac
in Internet Explorer as shown below:
A PCM Client (local or remote) can now communicate with devices managed
by the Agent, whether it is via Telnet, SSH or the Web interface.
NOTE If the Automatically detect settings box is checked, you may be unable to
connect successfully to your network.