PCM+ Agent with ONE zl Module Installation and Getting Started Guide 2009-11

2-1

Using the Application Menu Interface

Introduction

The Product OS CLI on the PCM+ Agent Module is a men-driven console

application that provides configuration and management tools for the PCM+

Agent Application. This interface is primarily used for the following:

■ Configuring the PCM+ Agent Module IP address

■ Changing the PCM+ Agent Module SSH Login Password

■ Stopping and Starting the Agent

■ Diagnostic tools and Agent status information

Agent configuration and management, like all PCM+ 3.x Agents, is done using

the Agent Manager and the Agent’s Web browser interface. For example,

configuring an Agent-initiated connection to the PCM+ 3.1 Server requires

access to the Agent’s Web browser interface to supply the Server’s IP address

and the necessary credentials (if the defaults are not used).

Accessing the Application Menu Interface

There are two ways to access the menu interface:

■ from the switch CLI

hostswitch (config)# services <slot ID> <product index>

hostswitch (config)# services <slot-id> name <application-name>

Replace <slot ID> with the letter of the chassis slot in which the module

is installed. Replace <product index> with the index number associated

with thePCM+ Agent Application or use pcm-agent for the <application-

name>.

■ using SSH

An SSH(v2) connection may be made to the Agent's IP address with user

name pcmagent and default password procurve. We recommend that

you change the SSH default password from the 1. Configuration menu by

choosing 3. SSH Login Password.