PCM+ Agent with ONE zl Module Installation and Getting Started Guide 2009-11

1-1
1
Getting Started
Introduction
The audience for this document is network administrators who need to deploy
an HP ProCurve Manager Plus 3.10 (PCM+) remote Agent, using the HP
ProCurve PCM+ Agent with ONE zl Module (J9496A) or by loading the HP
ProCurve PCM+ Agent Application on an HP ProCurve Open Network Eco-
system (ONE) Services zl Module (J9289A), and establishing communication
with a PCM+ 3.10 Server.
The network administrator is expected to be familiar with PCM+ 3.10 and
Agent operation. Once installed and connected to a PCM+ Server, the Agent
requires configuration to meet the management requirements of the network.
The following PCM 3.10 documentation is available on the Web at:
www.procurve.com/pcm-manuals
• Release Notes: ProCurve Manager Version 3.10
• HP ProCurve Network Management 3.10 Migration Guide
• HP ProCurve Network Management Installation and Getting
Started Guide Version 3.10
• HP ProCurve Manager Network Administrator's Guide Version 3.10
The HP ProCurve Manager Plus product page on the ProCurve Web site
provides product features and specifications, as well as access to the
datasheet and support information, including frequently asked questions
(FAQs) and product documentation:
www.procurve.com/pcmplus
Overview
An HP ProCurve PCM+ 3.10 remote Agent can be added to an existing HP
ProCurve Series 5400zl or Series 8200zl switch in your network using an HP
ProCurve ONE Services zl Module (J9289A). The HP ProCurve PCM+ Agent