Release notes - H3C SecBladeII-CMW520-F3169P07

l file file-url: Name of the boot file, consisting of 1 to 64 characters.

l main: Main application file.

l backup: Backup application file.

l A boot file is an application file used to boot the SecBladeII card. When there are multiple

application files on the CF card, you can use the boot-loader command to specify an application

file for the next boot. The main application file is used to boot the SecBladeII card. The backup

application file is used to boot the SecBladeII card when the main application file is unavailable.

Specifying a configuration file

Use the startup saved-configuration cfgfile command in user view to specify a configuration file for

the next boot and then restart the device. In the command, cfgfile is the name of the configuration file.

Application Upgrade on the Web Interface

SecBladeII cards support Web-based network management. The network administrator can

conveniently, visually manage, maintain, and upgrade the cards on the Web interface. Default Web

Preparations for Software Upgrade

Before software upgrade on the Web interface, connect a terminal (usually a PC) to an interface (for

example, GigabitEthernet 0/1) on the SecpathF1000E and configure a route between them as follows:

Step1 Connect a PC to interface GigabitEthernet 0/1 of the SecpathF1000E card with a crossover Ethernet

cable.

Step2 Configure an IP address for the PC and ensure that the PC and the interface are on the same

network segment.

Step3 Launch the Internet Explorer 6.0 or above on the PC, type the IP address 192.168.0.1 in the address

bar and press Enter to enter the Web user login page shown in Figure 2. Enter the username h3c

and the password h3c, and click login to log in to the Web interface.