Release notes - H3C SecBladeII-CMW520-F3169P07

17
Field Action
Reboot after the upgrade
is finished
Select this option if you want the SecpathF1000E to
reboot immediately after the software is upgraded.
Software Upgrade in Conventional Methods
SecpathF1000E provide the BootWare menu and a CLI, through either of which you can configure,
manage, and upgrade the cards.
The upgrade procedures of SecpathF1000E are similar unless otherwise specified in this chapter.
Preparations for Software Upgrade
Before upgrading the software in conventional methods, set up a configuration environment.
Setting HyperTerminal parameters
The following describes how to set HyperTerminal parameters on the PC running Windows XP:
Step1 Select Start > Programs/All Programs > Accessories > Communications > HyperTerminal to
establish a HyperTerminal connection.
Step2 In the Connection Description dialog box, enter a name for the connection and click OK, as shown
in Figure 4.