Release notes - H3C SecBladeII-CMW520-F3169P07

22
l You must press Ctrl+B in four seconds after “Press Ctrl+B to enter extended boot menu”
appears. Otherwise, the SecpathF1000E card will enter the application file decompression
process.
l After the SecpathF1000E card enters the application decompression process, if you want to enter
the extended boot menu, you need to reboot the SecpathF1000E card.
l The extended boot menu is referred to as the main menu unless otherwise specified.
Press Ctrl+B when “Press Ctrl+B to enter extended boot menu...” appears, and the SecpathF1000E
card prompts:
Please input BootWare password:
You are required to enter the BootWare password. (Note: The initial BootWare password is null. You
have three attempts to enter the correct BootWare password. A fourth attempt will make the card halt
and you need to restart the card to enter the correct password.) After you type the correct BootWare
password, the current operating device and the main menu are displayed. On the main menu, you
can select 9 to choose a storage device.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==================<EXTEND-BootWare MENU>=====================
| <1> Boot System |
| <2> Enter Serial SubMenu |
| <3> Enter Ethernet SubMenu |
| <4> File Control |
| <5> Modify BootWare Password |
| <6> Skip Current System Configuration |
| <7> BootWare Operation Menu |
| <8> Clear Super Password |
| <9> Storage Device Operation |
| <0> Reboot |
=============================================================
Enter your choice(0-9):
The main menu is described in Table 11.
Table 11 Main menu
Menu item Description
<1> Boot System Boot an application from the CF card.
<2> Enter Serial SubMenu
Enter the serial submenu.
For details, refer to “Serial Submenu” on page 23.