Release notes - H3C SecBladeII-CMW520-F3169P07

47
Step2 Exit from the main menu and reboot the SecBlade card to directly enter the system view.
This setting works only once. The super password will be restored when the SecBlade card is
rebooted for a second time.
Backing Up and Restoring the BootWare Program File
Select 7 on the main menu to enter the BootWare operation submenu. For details, refer to “BootWare
Operation Submenu” on page 25.
Backing Up the Entire BootWare Program File
Backing up the entire BootWare program file on the BootWare menu
To back up the entire BootWare program file, you need to first back up the basic segment and then
the extended segment as follows:
Step1 Select 1 on the BootWare operation submenu. The following information is displayed:
Will you backup the Basic BootWare? [Y/N]
Step2 Enter Y.
Begin to backup the Basic BootWare....................
Done!
By now, the basic segment has been backed up.
Then, the following information is displayed:
Will you backup the Extend BootWare? [Y/N]
Step3 Enter Y.
Begin to backup the Extend BootWare....................
Done!
By now, the extended segment has been backed up.
Backing up the entire BootWare program file at the CLI
You can also use the following command to back up the BootWare program file.
<H3C> bootrom backup
Now backuping bootrom, please wait...
Backup bootrom! Please wait...
Read normal basic bootrom completed!
Backup normal basic bootrom completed!