Release notes - H3C SECBLADENSM-CMW520-R3106

11
l You can modify the name of application files using the rename command after the SecBlade
card boots. If you changed the name of the secure application file, there is no secure application
file on the CF card and you need to download a secure application file to the CF card again.
l You can modify the type of application files of type M, B or N/A except type S on the BootWare
menu, or at the CLI after the SecBlade card boots.
l The secure application file is the last resort for the SecBlade card boot. You cannot change the
type of the secure application file, or change other types of files to the secure application file. You
can only download it using the BootWare menu.
l There is only one application file of the same type (M, B, or S) on the CF card.
Configuration files
The configuration files store configuration information of SecBlade cards. By default, three
configuration files are defined to load configuration information at the SecBlade card boot.
l Main configuration file: The file type is M and the file extension is .cfg. By default, the SecBlade
card uses the main configuration file to load configuration information.
l Backup configuration file: The file type is B and the file extension is .cfg. When loading with the
main configuration file fails, the SecBlade card uses the backup configuration file to load
configuration information.
l Default configuration file: The file type can be M, B, or N/A, and the file extension is .cfg or .xml.
When loading the main and backup configuration files fails, the SecBlade card uses the default
configuration file (startup.cfg or system.xml) to load configuration information. If loading the
default configuration file fails, the SecBlade card boots without any configuration information.
These three types of files are stored on the CF card for all SecBlade cards.
If you have loaded the three configuration files into the CF card, the SecBlade card will boot using
these three files in sequence. To change the type of a configuration file, refer to “Specifying a
configuration file” on page 14.
l The configuration file name containing a drive identifier and a string terminator cannot be longer
than 64 characters. For example, if the drive identifier is “CF:/”, the file name excluding the drive
identifier and string terminator can be at most [ 64 – 1 – 4 ] = 59 characters in length. Typically, a
file name excluding drive identifier and string terminator is recommended to contain no more than
16 characters.
l A configuration file name cannot contain extended ASCII characters (ASCII greater than or equal
to 128), invisible characters (ASCII less than 33), “, ‘, ?, \, space, *, |, <, /, :, >, or -.
l The dot “.” can appear in a file name, but not at the beginning or end of the file name. In addition,
the file name cannot contain two consecutive dots.
l A configuration file downloaded through the WEB is still stored on the CF card.
Note that:
l The configuration files for SecBlade card configuration at boot time can be a file of type M or B,
or a default configuration file of type N/A, but not non-default configuration files of type N/A.