Release notes - H3C SECBLADENSM-CMW520-R3106

30
==================<ETHERNET PARAMETER SET>===================
Note: '.' = Clear field.
'-' = Go to previous field.
Ctrl+D = Quit.
=============================================================
Protocol (FTP or TFTP):tftp
Load File Name :main.bin
:main.bin
Target File Name :main.bin
:main.bin
Server IP Address :192.168.80.200
Local IP Address :192.168.80.10
Gateway IP Address :
FTP User Name :
FTP User Password :
Table 16 Description of display information about Ethernet interface parameter configuration
Field Description
'.' = Clear field To clear the current field, input a (.) and then press Enter.
'-' = Go to previous field
To go to the previous field, input a hyphen (-) and then press
Enter.
Ctrl+D = Quit
The shortcut key combination for quitting the Ethernet parameter
setting interface is Ctrl+D.
Protocol (FTP or TFTP) Select TFTP or FTP to upgrade applications.
Load File Name
Select the file to be downloaded.
Set the path where the file is stored on the TFTP server.
l The first “main.bin” is the file name automatically
remembered by the system at the last update; the second
“main.bin” is the source file name set by the user.
l An application file name including the extension such as .bin,
cannot exceed 50 characters.
Target File Name
Set a name for the target file to be saved to the SecBlade card
and the extension of the target file needs to be the same as that
of the downloaded file.
l The first “main.bin” is the target file name automatically
remembered by the system at the last update.
l The second “main.bin” is the target file name set by the user
for this update.
If you want the SecBlade card to use the downloaded file, you
need to specify the file for the next boot. For related information,
refer to “Specifying Files” on page 13.
Server IP Address IP address of the TFTP server
Local IP Address IP address of the interface connecting the TFTP server
Gateway IP Address IP address of the gateway. You do not need to configure it.