Release Notes Threat Management Services zl Module ST.1.2.110427 06-2011

61
Known Issues
Release ST.1.1.100226/ST.1.1.100330
■ PR_44788 — When trying to add an IP route via the CLI, an error is shown without any error
message. This situation happens when there are two CLI sessions and when one CLI session
does a show ip route, and then the other CLI session tries to add a route.
HP E-5406zl(tms-module-C)# ip route 192.168.3.27 255.255.255.255 10.10.10.254
Error:
■ PR_44877 — In the TMS zl Module web browser interface, the Networking > Routing > Static
Routes tab sorts the table as follows:
10.1.1.0/24
10.1.10.0/24
10.1.11.0/24
10.1.2.0/24
10.1.3.0/24
The Networking > Routing > View Routes table is sorted correctly:
10.1.1.0/24
10.1.2.0/24
10.1.3.0/24
10.1.10.0/24
10.1.11.0/24
■ PR_44968 — Performance Related IPS issue - scheduled to be addressed in May-June 2010
release. Should not affect users with < 75% CPU utilization.
■ PR_45634 — An incorrect IP address is accepted in the destination field when editing a
multicast policy. Steps:
1. Go to Firewall/Access policies/Multicast
2. Click on Add a policy
3. On the source field, go to Options button and select Enter custom IP,IP/mask or IP-Range and
enter a non-multicast IP address.
4. On the destination field, go to Options button and select Enter custom IP,IP/mask or IP-Range
and enter a multicast IP address.
5. Before you click on Apply button and Close button, make sure you make a note of what zones
you picked for the policy.
6. Click on Apply button.
7. Pick the previously created policy and click on the edit icon.