Release Notes Threat Management Services zl Module ST.1.2.110909 11-2011

61
Known Issues
Release ST.1.1.100226/ST.1.1.100330
■ PR_42753 — In the TMS zl Module CLI, the show ip command's output has domain
misspelled as Dommain.
■ PR_42760 — The TMS zl Module SNMPv3 server only supports security level authPriv for
SNMPv3 users.
■ PR_42887 — Changing the hostname in the web browser interface does not change the
hostname in the CLI immediately. A current user of the CLI must logout and log back in again
to see the change reflected in the prompt. A CLI user can see the updated hostname in
show run even though the prompt is still the old hostname.
■ PR_42971 — RADIUS authentication will attempt to authenticate to local users if the user
name is entered without a domain or organization. This method of authenticating users is
documented but is very different from RADIUS authentication onHP E switch platforms and
could result in confusion.
■ PR_43321 — TMS zl Module is generating log entries with UNKNOWN_ZONE when a RADIUS
user is authenticated by a RADIUS server.
■ PR_43540 — The CLI commands ips web-proxy help and ips web-proxy ? output text do not
explain that a separate command ips web-proxy is required to enable the proxy.
■ PR_43546 — With PIM disabled, if a user sets up a a rendezvous point, PIM is automatically
enabled without notifying the user.
■ PR_43612 — copy pcap should be copy capture to be consistent with capture command.
■ PR_43806 — If a user wants to remove the management vlan and IP from monitor mode,
there is no command to do that. Work Around: Erase the startup configuration and reboot.
■ PR_44131 — For RIPv1, how classful static routes and host routes (/32) are summarized
differs between TMS zl Module and the 5400/8200 series switches.
■ PR_44372 — Inconsistency between the TMS zl Module and 5400/8200 zl switches on OSPF
Priority range. The switch OSPF Priority range is 0-255 and on the TMS zl Module it is 1-255.
■ PR_44476 — TMS zl Module does not log all administrative changes to the configuration.
As a result, the log files do not show all the necessary information to audit configuration
changes appropriately. For example, modifying an access policy does not produce a log entry.
■ PR_44556 — When a RADIUS server is accessed for user login requests, the RADIUS servers
will be tried in a round robin order.
■ PR_44658 — In the TMS zl Module CLI, the readability of the show run output could be
improved with better blank line spacing.
■ PR_44674 — In the CLI, show run, show sys and show tech display chassis as chasis.